Tiki Bar - Aqua 04 - Aqua Color Pen
To assemble:
- Take AquaColor pen and dissemble
- Carefully remove the rubber cap from the cartridge, keeping the cartridge upright
- Plug the cartridge into the pen and reassemble
Directions for use:
- Apply Bluesky base coat and cure for 60 seconds under an LED lamp/2 minutes under a UV lamp
- Apply 2-3 coats of Bluesky gel nail polish, curing for 60 seconds/2 minutes after each new coat
- Take your AquaColor pen and draw desired pattern over gel manicure
- Finish with a Bluesky top coat and cure for 60 seconds/2 minutes
To assemble:
- Take AquaColor pen and dissemble
- Carefully remove the rubber cap from the cartridge, keeping the cartridge upright
- Plug the cartridge into the pen and reassemble
Directions for use:
- Apply Bluesky base coat and cure for 60 seconds under an LED lamp/2 minutes under a UV lamp
- Apply 2-3 coats of Bluesky gel nail polish, curing for 60 seconds/2 minutes after each new coat
- Take your AquaColor pen and draw desired pattern over gel manicure
- Finish with a Bluesky top coat and cure for 60 seconds/2 minutes
-
1. Prep your nails
File your nails to the desired shape and buff for a clean and dry surface.2. Push back cuticles
Push back your cuticles, trimming if necessary.3. Clean nails
Use a cleanser wipe to remove any dust and debris and to clean your nails before beginning the application stage.4. Apply the Base Coat
Apply a thin layer of Bluesky Base Coat to your nails, cure under UV/LED lamp for 60-90 seconds.5. Apply the Colour Gel
Apply 1st thin layer of colour gel polish and cure for 60 seconds (sheer finish). Apply 2nd layer of colour gel polish and cure for 60 seconds (normal finish). Apply 3rd layer of colour gel polish, if needed, and cure for 60 seconds (solid colour).6. Apply the Top Coat
Finally, finish off with a layer of top coat and cure under UV/LED lamp for 60-90 seconds. Use a Bluesky Cleanser Wipe to remove the sticky residue leaving super shiny nails.
1. Prep your nails
File your nails to the desired shape and buff for a clean and dry surface.
2. Push back cuticles
Push back your cuticles, trimming if necessary.
3. Clean nails
Use a cleanser wipe to remove any dust and debris and to clean your nails before beginning the application stage.
4. Apply the Base Coat
Apply a thin layer of Bluesky Base Coat to your nails, cure under UV/LED lamp for 60-90 seconds.
5. Apply the Colour Gel
Apply 1st thin layer of colour gel polish and cure for 60 seconds (sheer finish). Apply 2nd layer of colour gel polish and cure for 60 seconds (normal finish). Apply 3rd layer of colour gel polish, if needed, and cure for 60 seconds (solid colour).
6. Apply the Top Coat
Finally, finish off with a layer of top coat and cure under UV/LED lamp for 60-90 seconds. Use a Bluesky Cleanser Wipe to remove the sticky residue leaving super shiny nails.