Currency

Your cart

Your cart is empty

Browse our collections

How to use our AquaColor gel nail pen

How to use our AquaColor gel nail pen

We love trying out new nail techniques and finding ways to get more creative. As soon as we launched our AquaColor nail pens, we could tell that plenty of you felt the same; using the pens to produce cool, creative designs which we’ve loved seeing so far. 

To help you with some ideas – and to get you started if it’s your first time using our nail pens – we’ve put together three brilliant designs for you to create from home.

For all three looks, you’ll want to begin by:

Prepping the nail: use the Bluesky nail file, push back and trim your cuticles, gently buff your nails and then clean them with a cleanser wipe.

Using a base coat: apply a thin layer of base coat and cure for 30 seconds under an LED lap/1 minute in UV.

 

Look one: crystal ball

AqauaColor nail pens pink and blue

  1. Apply two layers of a Bluesky white gel polish of your choice and cure it for 60 seconds in an LED lamp/2 minutes in UV.
  2. Apply our no wipe matte top coat and cure for 60 sec in LED/2 min in UV. Tip: if you choose to apply a top coat with a sticky layer, make sure you wipe it with cleanser and wait for 30-60 secs so that you’re able to control the ink from the AquaColor pen.
  3. Apply 2-3 drops of Bluesky AquaColor pen number 4 and 2-3 drops of number 5.
  4. Get your brush that is lightly dipped in Cleanser solution and spread the colours to blend. Wait 30-60 secs and let it dry naturally – there’s no need to cure it.
  5. Apply no wipe top coat and cure for 60 secs in an LED lamp/2 mins in UV.

 

Look two: flower power

AqauaColor nail pen blue

  1. Apply two layers of a Bluesky white gel polish of your choice and cure it for 60 secs in an LED lamp/2 mins in UV.
  2. Apply our no wipe matte top coat and cure for 60 sec in LED/2 min in UV. As with look one, if you choose to apply a top coat with a sticky layer, make sure you wipe it with cleanser and wait for 30-60 secs so that you’re able to control the pen’s ink.
  3. Use AquaColor pen number 5 and apply two small dots opposite each other towards the right corner of the nail.
  4. With your brush, pull the colour to make it shear. Let it dry naturally for 30 secs.
  5. Once dry, apply another two drops in between the first two and repeat step four to turn it into a petal.
  6. Finish with a no wipe top coat and cure for 60 secs LED/2 min UV.

 

Look three: spring vibes

AqauaColor nail pens pink, yellow and blue

  1. Choose your favourite Bluesky white gel polish and apply two layers; cure for 60 secs in an LED lamp/2 mins in UV.
  2. Apply our no wipe matte top coat and cure for 60 secs in LED/2 min in UV.
  3. Apply 2-3 drops of AquaColor pen number 3 and number 4.
  4. Add in 2-3 drops of number 5 in the gaps as shown.
  5. Get your brush and carefully blend the colours together. Wait 30-60 seconds to let it try naturally. If you need more cleanser to blend then just re-apply to your brush.
  6. Apply a no wipe top coat and cure for 60 secs LED/2 min UV.
  7. Finally, use our black gel paint with a thin liner brush to outline the patterns and cure.

Create watercolour designs for your gel nail manicure with our AquaColor nail pens! Browse the full range of AquaColor pens. You can also use our Cleanser Wipes to soak your brush!  Don’t forget to share your designs with us by tagging us in on Instagram @bluesky_cosmetics – we’ll share our favourites on our page and our stories!

Next post
Back to Blog

Leave a comment

Please note, comments must be approved before they are published