Glaze Gel Tutorial

Instructions

Preparation is everything...

1. Use the Bluesky Nail File to file your nails to the desired shape.
2. Push back and trim your cuticles.
3. Gently buff your nails with your Bluesky Nail Buffer.
4. Clean your nails with a Bluesky Cleanser Wipe.

Glaze is a little different to your normal gel polish...

1. Apply a thin layer of Bluesky Base Coat to all five nails, capping the ends. Avoid the skin and cuticle.
2. Apply a thin layer of Bluesky Base Coat to all five nails, capping the ends. Avoid the skin and cuticle. Cure for 60 seconds under your Bluesky nail lamp.
3. Take your Glaze Gel and apply a thin coat, capping the ends and avoiding the skin and cuticle.
4. Cure for 60 seconds - as this is a thin glaze coat and not a gel polish, you may feel some initial sensitivity for a few seconds when you begin to cure. 
5. Apply as many layers as needed for the desired effect. For a light glaze effect, apply 1-2 coats. For a thicker coverage, apply 2-3 coats. Cure for 60 seconds after applying each layer.
6.  Apply your Bluesky Top Coat and cure for 60 seconds.
7. Finish by wiping all nails with a Bluesky Cleanser Wipe for a high-shine finish. Repeat for your next hand!

Tip: Because it's a glaze, if slight staining occurs you can remove easily with cleanser.